ZONCN High Protection IP65 Inverter VFD 220v 380v For Pump 1hp 2hp 3hp Motor Drives
Inverter Description
1. Voltage: 110v/220v single phase input, 380v three phase input
2. Power range: 0.75kw to 160kw
3. Both V/F control and vector control is available
4. Protection level: IP65/IP54
5. Can be mounted directly on the motor
6. Analog voltage input (0-10V) and Analog current input (4-20mA) is available
7. MODBUS RS485 communication
8. Function: No water stop, timing, antifreeze, water supply alarm, etc.
9. Built-in EMC filter and PID control
10. Can be used in high pollution, bad enviroment, for example, dirty, damp, etc.
11. OEM/ODM is always welcome
VFD inverter Technical Specification
| ITEM | Z5000 Series Inverter |
| Standard functions | Control mode | Sensorless flux vector control (SFVC) |
| Voltage/Frequency (V/F) control |
| Maximum frequency | Vector control: 0–320 Hz |
| V/F control: 0–3200Hz |
| Carrier frequency | 1 kHz–16 kHz |
| The carrier frequency can be automatically adjusted based on the load features. |
| Input frequency resolution | Digital setting: 0.01 Hz |
| Analog setting: maximum frequency x 0.025% |
| Startup torque | G type: 0.5 Hz/150% (SFVC); |
| P type: 0.5 Hz/100% |
| Speed range | 1:100 (SFVC) |
| Speed stability accuracy | ± 0.5% (SFVC) |
| Overload capacity | G type: 60s for 150% of the rated current, 3s for 180% of the rated current. |
| P type: 60s for 120% of the rated current, 3s for 150% of the rated current |
| Torque boost | Fixed boost |
| Customized boost 0.1%–30.0% |
| V/F curve | Straight-line V/F curve |
| Multi-point V/F curve |
| N-power V/F curve (1.2-power, 1.4-power, 1.6-power, 1.8-power, square) |
| V/F separation | Two types: complete separation; half separation |
| Ramp mode | Straight-line ramp |
| S-curve ramp |
| Four groups of acceleration/deceleration time with the range of 0.0–6500.0s |
| DC braking | DC braking frequency: 0.00 Hz to maximum frequency； Braking time: 0.0-36.0s； |
| Braking action current value: 0.0%–100.0% |
| JOG control | JOG frequency range: 0.00–50.00 Hz |
| JOG acceleration/deceleration time: 0.0–6500.0s |
| Onboard Multiple preset speeds | It implements up to 16 speeds via the simple PLC function or by input(X) terminal states |
| Onboard PID | It realizes process-controlled closed loop control system easily. |
| Auto voltage | It can keep constant output voltage automatically when the mains voltage changes. |
| regulation (AVR) |
| Over-voltage/ | The current and voltage are limited automatically during the running process so as to avoid frequent tripping due to over-voltage/over-current. |
| Over-current stall |
| control |
| Torque limit and torque control | It can limit the torque automatically and prevent frequent over-current tripping during the running process. |
| Instantaneous stop doesn’t stop | The load feedback energy compensates the voltage reduction so that the AC drive can continue to run for a short time. |
| Rapid current limit | It helps to avoid frequent over-current faults of the AC drive. |
| High performance | Control of asynchronous motor is implemented through the high-performance current vector control technology. |
| Timing control | Time range: 0.0–6500.0 minutes |
| Communication methods | RS485 |
| Running command channel | Given by the panel, control terminals, |
| Serial communication port, can be switched by many ways |
| Frequency source | 10 kinds of frequency source, given by |
| Digital analog voltage, analog current, Pulse, serial port. can be switched by many ways |
| Auxiliary frequency source | 10 kinds of Frequency source, given by Digital analog voltage, analog current, pulse, serial port. Can be switched by many ways. |
| Input and output | Input terminals | 6 digital input terminals, one of which supports up to 100 kHz high-speed pulse input.(S3) |
| 2 analog input terminal,one of which only supports 0-10V voltage input and the other supports 0–10 V voltage input and 4–20 mA current input. |
| Output terminal | 1 digital output terminal |
| 1 relay output terminal (RA.RB.RC) |
| 1 analog output terminal :that supports 0–20 mA current output or 0–10 V voltage output |
| Frequency source | Digital setting, analog voltage setting, analog current setting, pulse setting and serial communication port setting. |
| LED display | It displays the parameters. |
| Key locking and function selection | It can lock the keys partially or completely and define the function range of some keys so as to prevent malfunction. |
| Protection mode | Motor short-circuit detection at power-on, output phase loss protection, over-current protection, over-voltage protection, under voltage protection, overheat protection and overload protection. |
VFD Specification
| VFD Model | Input voltage | Rated Output Power (KW) | Rated Input current (A) | Rated Output Current (A) | Motor Power (kW) |
| Z5200A00D7K-BF | 1PH AC220V ±15% | 0.75 | 7.2 | 5 | 0.75 |
| Z5200A01D5K-BF | 1.5 | 10 | 7 | 1.5 |
| Z5200A02D2K-BF | 2.2 | 16 | 11 | 2.2 |
| Z5400A0D75K-BF | 3PH AC380V ±15% | 0.75 | 3.8 | 2.5 | 0.75 |
| Z5400A1D5K-BF | 1.5 | 5 | 3.7 | 1.5 |
| Z5400A02D2K-BF | 2.2 | 5.8 | 5 | 2.2 |
| Z5400A03D7K-BF | 3.7 | 10 | 9 | 3.7 |
| Z5400A05D5K-BF | 5.5 | 15 | 13 | 5.5 |
| Z5400A07D5K-BF | 7.5 | 20 | 17 | 7.5 |
| Z5400A0011K-BF | 11 | 26 | 25 | 11 |
| Z5400A0015K-BF | 15 | 35 | 32 | 15 |
| Z5400A0018K-BF | 18.5 | 38 | 37 | 18.5 |
| Z5400A0022K-BF | 22 | 46 | 45 | 22 |
| Z5400A0030K-BF | 30 | 62 | 60 | 30 |
| Z5400A0037K-BF | 37 | 76 | 75 | 37 |
| … | … | … | … | … |
| Z5400A00160K-BF | 160 | | | 160 |
Inverter Application
FAQ
1. What Z5200 and Z5400 stands for?
A. Z5200 stands for Z5000 series 220v single phase input inverter, Z5400 stands for Z5000 seris 400V three phase input inverter
2. Does this series OF inverter have analog input terminals?
A. Yes, FIC terminals can be used to select analog voltage input(0-10v) and analog current input (4-20mA) through the switch SW1.
3. This series of inverter is Dust-proof, water-proof?
A. Yes, Z5000 inverter is high protection inverter, it can be used in bad enviroment, eg. damp, dirty, etc.
4. What is your warranty time for this inverter?
A. 18 months
5. Can i buy 1unit to test first?
A. No problem, our MOQ is 1 unit.
Product Tags:
|
|
Pump Inverter Ip65 Ip54 Protection Variable Frequency Drives VFD Inverter 0.75kw-160kw Images
|
